CAT3 Telephone Cable

ROUND CAT3 TELEPHONE CABLE,TWISTED PAIRS,UNSHIELD

Send InquiryChat Now

Description:

Huier Cable’s Category 3 Plenum Cable is installed in a building’s return air plenums for both convenience and aesthetics. Category 3 Riser Cable is ideal for installation in vertical riser and general horizontal applications.

A Category 3 cable (Cat 3 cable) is a type of unshielded twisted pair (UTP) cable that is used for voice and data communications in computer and telecommunication networks. It is an Ethernet copper cable defined by the Electronics Industry Alliance (EIA) and Telecommunication Industry Association (TIA).

Available in various jacket colors and pair counts, General Cable’s cost-effective category 3 cables meet installers’ needs for virtually every application.

SHIELDED CABLE (STP) vs UNSHIELDED CABLE (UTP)

Cat 3 cables are most commonly utilized with unshielded twisted pairs (UTP). However, environments with large motors, generators, and certain types of high-voltage lighting are major sources of Electromagnetic and Radio Frequency Interference (EMI/RFI). In these applications, shielded twisted pair (STP) cable will help protect data signals when connected properly. Call us to discuss your application!

Whether you're doing new installations or upgrading your existing infrastructure, Warehouse Cables has the Cat 3 bulk cable you need, at an affordable price!

Benefits and Features

Plenum

  • For use in air handling ducts and spaces in accordance with Article 800 of the National Electrical Code (NEC)

  • This cable is UL (USA) & cUL (Canada) listed for this application by passing NFPA 262 (FT6 or previously UL 910 Steiner Tunnel) test

Non-plenum

  • For use as a vertical run in a shaft and for general purpose communications use in accordance with Article 800 of the NEC

  • This cable is ETL (USA) & cETL (Canada) listed for this application by passing the UL 1666 Riser Cable Flammability Test

  • Also passes the CSA FT4 Vertical Flame Test - Cables in Cable Trough from clause 4.11.4 of CSA C22.2 No. 0.3

Conceived in 1990, the Cat 3 cable was one of the most popular data communication cables until 2000. It is used in 10Base-T and token ring networks from which it has the ability to transmit data at a speed of 10 Mbps. When implemented in 100BaseT networks, a Cat 3 cable can carry data at speeds much higher than its base speed.

The Cat 3 cable delivers good voice communication performance because it provides 16 MHz of bandwidth, which is more than enough for phone calls. It is also popular in network environments where electromagnetic interference is of minimal concern.


Application:
● Category 3 is suitable for high speed DATA/LAN transmission up to 16 Mbps.
● 10 Base-T
● 4 Mbps Token Ring
● Voice


Construction Parameters:

Center Conductor:

Bare Copper or Solid CCA (Copper Clad Aluminum)

Construction:

24AWG

Cable:

2~25 insulated twisted pairs.

Core Insulation:

HDPE High Density Polyethylene

Construction:

0.90±0.05mm

Core Identification:

Blue+White/Blue, Orange+White/Orange, Green+White/Green, Brown+White/Brown. And etc.

Screening/Shielding:

UTP-Unshield'unscreened'twisted pairs.

Outer Sheathing:

PVC (Polyvinyl Chloride), Flameproof / LSZH (Low Smoke Zero Halogen) / PE (outer door).

Jacket Overall Diameter:

Depends on conductor NO.

Outer Jacket Colour:

Customization. with different color stripe is available.

Stripping cord:

3*150D

Packing:

1000FT(305M)/100M/200M/Easy Pull Box or Wooden Spool/Plastic Reel/Paper Reel

Making:

As required by customer

Test:

100% pass Fluke test.




Packing:

   image003_副本.jpg


image005(001).jpg


Company View:



Shipping:




Certificates:

image017(001).jpgimage019(001).jpg


Hot Tags: CAT3 telephone cable, China, manufacturers, suppliers, factory, customized, bulk
Related Products
Inquiry